HOW IT WORKS
HOW IT WORKS
A lithium pack built to dump current fast. Clamp it on, press the button, and it delivers 1,000–4,000 A of peak current within seconds — enough to crank the engine without a second car or a tow truck.
Scroll to see the full process
OUR AREAS OF APPLICATION
Where it works
Any 12 V / 24 V system, petrol or diesel — pick the peak current by engine size
- Lorry
- SUV
- Forklift
- Car
- Motorcycle
- Boat
STEP BY STEP
Four steps to start
Below 30% charge, it may not start your engine
Works on 12 V and 24 V petrol or diesel vehicles. Bigger engines need more peak current — pick the model that matches yours.
If it does not start first time, wait a minute before trying again. After three attempts, stop and check the vehicle for other faults; below 2 V at the battery, use force-start mode.
01Power on, plug in
Hold to power on, confirm charge is above 30%, push the smart clamp all the way in.
02Red to +, black to −
Red clamp on the positive terminal, black on the negative. Make sure each jaw bites the post.
03Green light, then crank
Once the indicator turns green, start the engine within 30 seconds.
04Unplug first, then remove
After the engine fires, unplug the smart clamp, then take both clamps off the battery.